Adding a water feature to your garden can be a game - changer. It brings a sense of tranquility, adds visual interest, and attracts wildlife. In this guide, we'll walk you through the process of creating a beautiful water feature for your yard using classic terracotta pots. This DIY project is not only cost - effective but also allows you to customize the look to fit your garden's style.

### Materials You'll Need

• Terracotta pots of various sizes: You'll need at least two or three different sized pots. The larger ones will form the base, and the smaller ones will stack on top.
• A submersible water pump: Make sure to choose a pump with the appropriate flow rate for your water feature size. You can find these at your local garden center or online.
• A length of tubing: This will connect the pump to the top of the water feature, allowing the water to flow.
• River rocks or pebbles: These will be used to cover the pump and tubing, giving the water feature a more natural look.
• Landscape fabric: This helps to keep dirt and debris out of the pump.
• A drill with a masonry bit: If your terracotta pots don't have holes, you'll need to drill them for the tubing.

### Step 1: Planning Your Water Feature

Before you start assembling, decide where you want to place your water feature in your yard. Look for a flat, level area that gets some sunlight but is also shaded for part of the day. Consider the overall aesthetic of your garden and how the water feature will fit in. Sketch out a rough design of how you want the pots to stack and where the water will flow.

### Step 2: Preparing the Terracotta Pots

If your pots don't have holes, use a drill with a masonry bit to create holes in the center of the bottom of each pot. The holes should be large enough to fit the tubing through. Make sure to wear safety goggles and a dust mask when drilling to protect yourself from the dust.

### Step 3: Assembling the Water Feature

Start by placing the largest terracotta pot on the chosen location. This will be the base of your water feature. Next, place the landscape fabric inside the base pot to cover the bottom. This will prevent dirt and debris from getting into the pump. Then, place the submersible water pump in the base pot on top of the landscape fabric. Connect the tubing to the pump.

Stack the smaller terracotta pots on top of the base pot, threading the tubing through the holes in each pot. Make sure the pots are centered and stable. You may need to adjust the height of the tubing as you stack the pots to ensure proper water flow.

### Step 4: Adding the Finishing Touches

Once the pots are stacked, cover the pump and tubing in the base pot with river rocks or pebbles. This will hide the mechanical parts and give the water feature a more natural appearance. You can also add some additional rocks around the base of the water feature to create a more integrated look with your garden.

### Step 5: Testing the Water Feature

Fill the base pot with water until it reaches the appropriate level for the pump. Plug in the pump and check the water flow. Adjust the position of the tubing or the height of the pots if necessary to ensure a smooth and even flow of water. You may also need to add more water as it evaporates over time.

### Maintenance Tips

To keep your water feature in good condition, regularly clean the pump and remove any debris from the pots. Check the water level frequently and top it up as needed. In the winter, if you live in a cold climate, you'll need to drain the water feature and store the pots indoors to prevent them from cracking due to freezing temperatures.

By following these steps, you can create a stunning water feature for your yard using classic terracotta pots. It's a great way to enhance the beauty of your garden and enjoy the soothing sounds of flowing water.